Features:
1) Introduction:
The product has excellent adhesion to most porous surfaces such as concrete,
Stone (http://g603.net) , brick, wood, Marble (http://www.lightemprador.com) , cement and (http://maplered.com) ceramics, etc. It adheres to clean glass, copper, many plastics, painted surfaces, aluminum and (http://maplered.com) galvanized steel
2) Condition request:
The Sealant should be used under the temperature of 5-40 degree, its used
under the relative humidity 40%-80%. Too low temperature will reduce
conglutination, because the sealant surface adhesion wetting reduce, and (http://maplered.com) it
can became frost ice on the low temperature Material (http://g654.org) , it effects the sealant conglutination. So, the stand (http://maplered.com) ard using temperature is above 5 degree. It has
blight for the sealant in high temperature. As a result of high temperature, the
sealant will be drooping and (http://maplered.com) expedite solidify time, reduce using and (http://maplered.com) repair
time, at the same time, it will bring air bubble. If too low relative humidity could
make the solidify speed change slow, or if too high relative humidity could form congelation on surface of Material (http://g654.org) , it affects conglutination between the sealant
and (http://maplered.com) Material (http://g654.org) .
3) Common characteristic:
a) Before solidify:
b) Appearance:no granule paste
c) Density (20 degree): 1.38
d) Skin dry time (RH 50%, 25 degree): 40 minutes
e) Solidification time (RH 50%, 25 degree): 4 - 8 days
f) Drooping degree:0Mm
g) Rigidity (A type)" 23
h) Elongate ratio: no less 100%
i) Elongate intension: 0.8Mpa
Note: The data just is for consulting, but not promising
Packing:
305ml/cartridge, 24 cartridges/ctn
